https://popups.uliege.be/esaform21/index.php?id=1684 Index terms fr 0 https://popups.uliege.be/esaform21/index.php?id=3654 In addition to thermomechanical treatment, one of the main factors affecting the mechanical properties of steel is the chemical composition. The chemical composition may vary for a special high-strength low-alloy steel to meet certain mechanical property requirements. This work presents an approach, based on the method of physical-chemical modelling developed at the Z.I. Nekrasov Iron and Steel Institute of the National Academy of Sciences of Ukraine, to optimise the chemical composition of high-strength structural steels. The principle of this method is to describe the chemical composition of a melt by a complex of integral model parameters of interatomic interaction, characterising the chemical and structural state of the melt. The experimental data were analysed to obtain the regression model for mechanical properties based on the parameters of interatomic interaction. Finally, a multi-criteria optimisation method was applied to obtain an optimal set of microalloying elements which ensure the required mechanical properties. Mon, 29 Mar 2021 13:57:27 +0200 Thu, 08 Apr 2021 19:06:59 +0200 https://popups.uliege.be/esaform21/index.php?id=3654 https://popups.uliege.be/esaform21/index.php?id=4293 Thermally supported clinching (Hotclinch) is a novel promising process to join dissimilar materials. Here, metal and fibre-reinforced thermoplastics (FRTP) are used within this single step joining process and without the usage of auxiliary parts like screws or rivets. For this purpose, heat is applied to improve the formability of the reinforced thermoplastic. This enables joining of the materials using conventional clinching-tools. Focus of this work is the modelling on mesoscopic scale for the numerical simulation of this process. The FTRP-model takes the material behaviour both of matrix and the fabric reinforced organo-sheet under process temperatures into account. For describing the experimentally observed phenomena such as large deformations, fibre failure and the interactions between matrix and fibres as well as between fibres themselves, the usage of conventional, purely Lagrangian based FEM methods is limited. Therefore, the combination of contact-models with advanced modelling approaches like Arbitrary-Lagrangian-Eulerian (ALE), Coupled-Eulerian-Lagrangian (CEL) and Smooth-ParticleHydrodynamics (SPH) for the numerical simulation of the clinching process are employed. The different approaches are compared with regard to simulation feasibility, robustness and results accuracy. It is shown, that the CEL approach represents the most promising approach to describe the clinching process. Thu, 01 Apr 2021 17:51:44 +0200 Thu, 01 Apr 2021 17:51:44 +0200 https://popups.uliege.be/esaform21/index.php?id=4293 https://popups.uliege.be/esaform21/index.php?id=4032 Electrically conductive and thereby electrical discharge machinable ceramics may gain further relevance for tooling applications and in chemical industry. They combine high chemical and thermal durability with high hardness and strength. While these properties represent a significant advantage for application, they are a major challenge for conventional machining. Due to the thermophysical removal principle, wire electrical discharge machining (WEDM) is a suitable manufacturing process for hardness-independent machining and may broaden the use of ceramics especially in case of customized complex parts. Up to now, there are only a few investigations on WEDM of electrically conductive ceramics, especially with regard to the surface integrity and the influence of the EDM process on the mechanical properties. A previous study investigated the influence of different WEDM technologies on the surface integrity and the resulting load-bearing capacity of a zirconia-tungsten carbide (TZP-WC) ceramic. Based on this investigation, the heat flow in this ceramic composite was calculated with the use of a heat simulation model and compared with the analyzed rim zone, in order to predict a priori reliable process parameters. Furthermore, the wire electrical machinability and the bending strength of alumina-zirconia-tungsten carbide (ATZ-WC) composite ceramics with different fractions of the respective phases were investigated to identify the correlations and verify the simulation model. Tue, 30 Mar 2021 10:32:47 +0200 Tue, 30 Mar 2021 10:32:47 +0200 https://popups.uliege.be/esaform21/index.php?id=4032