https://popups.uliege.be/esaform21/index.php?id=232 Publications of Auteurs Werner Homberg fr 0 https://popups.uliege.be/esaform21/index.php?id=4682 Joints are an essential part of modern (lightweight) structures in a broad variety of applications. The reason for this is the rapidly increasing number of different material combinations needing to be joined in application areas like the automotive industry. It is currently common to use numerous auxiliary or standardized elements instead of individually adapted joining elements. This leads to a large number of different joining elements per product and thus to high costs. An innovative approach to overcoming this issue is the design, manufacture and setting of joint-specific joining elements. A good candidate for the manufacture of adapted joining elements of this type is the so-called friction spinning process. The joining elements formed in this way can be specifically adapted to the application in question in terms of both shape and mechanical properties. The part geometry required for the properties of a given joint is formed using a universal forming tool. This makes it possible to form a wide variety of sub geometries for the auxiliary joining part as a function of the prevailing joint condition, using a single forming tool and starting from the same semi-finished bar material. By applying different process strategies for the rotational speed and feed rate during the forming operation, the same part geometry can even be given different local mechanical properties. The following contribution presents the results of ongoing research work and includes the process concept, process properties, tooling and the results of experimental investigations into the joining of two sheet metal parts with help of this new joining process. Thu, 08 Apr 2021 18:56:17 +0200 Thu, 08 Apr 2021 18:56:22 +0200 https://popups.uliege.be/esaform21/index.php?id=4682 https://popups.uliege.be/esaform21/index.php?id=2759 One of the main objectives of production engineering is to reproducibly manufacture (complex) defect-free parts. To achieve this, it is necessary to employ an appropriate process or tool design. While this will generally prove successful, it cannot, however, offset stochastic defects with local variations in material properties. Closed-loop process control represents a promising approach for a solution in this context. The state of the art involves using this approach to control geometric parameters such as a length. So far, no research or applications have been conducted with closed-loop control for microstructure and product properties. In the project on which this paper is based, the local martensite content of parts is to be adjusted in a highly precise and reproducible manner. The forming process employed is a special, property-controlled flow-forming process. A model-based controller is thus to generate corresponding correction values for the tool-path geometry and tool-path velocity on the basis of online martensite content measurements. For the controller model, it is planned to use a special process or microstructure (correlation) model. The planned paper not only describes the experimental setup but also presents results of initial experimental investigations for subsequent use in the closed-loop control of α’-martensite content during flow-forming. Wed, 24 Mar 2021 18:56:43 +0100 Fri, 02 Apr 2021 16:08:16 +0200 https://popups.uliege.be/esaform21/index.php?id=2759 https://popups.uliege.be/esaform21/index.php?id=2382 Higher quality requirements by customers demand higher precision and accuracy from manufacturing processes. Application oriented preparation of semi-finished materials is key for subsequent forming operations, therefore, straightening machines are employed. Straightening strengthens the material by increasing plastic deformation by means of strain hardening, resulting in undesirable reduction in formability when processing high strength materials, in particular. Conventional roll-type straightening machines process either bars or strips. This is achieved upon passing material between rolls arranged in two staggered rows. However, conventional straightening processes do not adapt to the local varying distortion of coiled strips. Innovative, self-correcting process control techniques, which adapt to the initial geometric characteristics of the strip, present a promising approach to fix this issue through optimization of the leveling process. Here, an innovative strategy to improve straightening of high strength steel materials (1.4310) is presented. This implements optimized leveling, adding minimal plastic deformation and, thus, strain hardening. To operate an intelligent straightening machine, a reliable online measurement of the surface defects is fundamentally essential. The MagnaTest, which is developed for material testing, is made feasible for such purposes after calibrating for curvature measurement. Preliminary results are promising in regards to measuring the curvature online, so that the following straightening process can be close loop controlled. The bending measurement is linked to open/closed loop control, therefore providing an optimal straightening result in regards to formability, leveling, and reduced strain hardening. Tue, 23 Mar 2021 18:18:32 +0100 Mon, 29 Mar 2021 19:53:16 +0200 https://popups.uliege.be/esaform21/index.php?id=2382