https://popups.uliege.be/esaform21/index.php?id=2380 Publications of Auteurs Pedro-José Arrazola fr 0 https://popups.uliege.be/esaform21/index.php?id=2424 The highly used Ti6Al4V alloy is a well know hard-to-machine material. The modelling of orthogonal cutting process of Ti6Al4V attract the interest of many researchers as it often generates serrated chips. The purpose of this paper is to show the significant influence of cutting speed on chip formation during orthogonal cutting of Ti6Al4V along with different material constitutive models. Finite element analyses for chip formation are conducted for different cutting speeds and are investigated with well-known Johnson-Cook constitutive model, a modified Johnson–Cook model known as Hyperbolic Tangent (TANH) model that emphasizes the strain softening behavior and modified Johnson-Cook constitutive model that consider temperature dependent strain hardening factor. A 2D Lagrangian finite element model is adopted for the simulation of the orthogonal cutting process and the results from the simulations such as calculated forces, chip morphologies are analyzed and are compared with the experimental results to highlight the differences. The results analysis shows that, the temperature in the secondary deformation zone is directly proportional to the cutting speed. Tue, 23 Mar 2021 18:41:10 +0100 Mon, 29 Mar 2021 09:19:29 +0200 https://popups.uliege.be/esaform21/index.php?id=2424 https://popups.uliege.be/esaform21/index.php?id=2373 Composites materials and especially FRP are increasingly employed in many fields of applications (transport, aerospace, …) due to the current trend of improving global energy performances of new designs notably by mass saving. However the use of metallic materials such as aluminum and titanium alloys is still necessary in many cases and a lot of structures are made of a dual technology called stacks (panels composed of different layers of FRP and metal bounded together). Combining the different properties of these materials offers many advantages regarding the mechanical and structural aspects. This is nevertheless for the same reason that machining and especially drilling stacks is a laborious task: the tools and cutting conditions are way too divergent to avoid vibrations, problems of dimensional tolerances and delamination of the composite. The knowledge and characterization of the drilling cutting forces is a first step to solve these issues. The purpose of this article is to provide an accurate macroscopic analytical model fitted for stacks and compare it quantitatively with experimental tests. The given model is divided in two parts (i.e. respectively adapted for the two materials) and is based on the discretization of the cutting edge. The proposed algorithm is able to predict accurately drilling force and torque along time in function of the cutting conditions, the tool and material configurations. A reverse least squared method is used to obtain the empirical input parameters, allowing to minimize the number of experimental drilling tests to obtain the empirical input parameters. Tue, 23 Mar 2021 18:03:56 +0100 Mon, 29 Mar 2021 19:32:08 +0200 https://popups.uliege.be/esaform21/index.php?id=2373 https://popups.uliege.be/esaform21/index.php?id=2224 Increased stability in machining processes is highly desired by all machining industries when vibrations and specially chatter occur. This phenomenon is defined as a self-excited vibration that occurs due to the regeneration of waviness of the workpiece surface. In machining industry, the trend is to rely on the trial and error method or mere experience when deciding the machining spindle speeds, depths of cut and tool stick-outs, all of which are parameters directly related to chatter occurrence. Currently, the shortest possible tool stick-out is chosen by default, but literature has proven that longer stick-outs may bring some advantages when it comes to material removal rates. Aiming to prove this theory, this paper will discuss the influence of the tool stick-out on machining chatter occurrence. To that end, the effect of the tool stick-out on the modal parameters of the system, on the Stability Lobe Diagram (SLD) and on productivity will be analysed. Therefore, a number of Tap-Tests to different tool/tool-holder/stick-out combinations have been performed, in order to gather the data (FRFs and SLDs) where the analysis is based on. Last but not least, some machining tests have been conducted aiming to compare the theoretical chatter occurrence conditions, provided by the SLD, with the experimental ones. For that, two Al5083 workpieces have been slot milled under different cutting conditions, facilitating the unexpected results wherein the conclusions have been based upon. Tue, 23 Mar 2021 14:42:49 +0100 Mon, 12 Apr 2021 10:50:45 +0200 https://popups.uliege.be/esaform21/index.php?id=2224