https://popups.uliege.be/esaform21/index.php?id=2991 Publications of Auteurs Antonino Squillace fr 0 https://popups.uliege.be/esaform21/index.php?id=4124 In the context of Industry 4.0, interest is increasing towards Additive Manufacturing processes due to their several advantages. Among these, the Direct Laser Deposition (DLD) is an innovative technology for additive metal part fabrication, and it is currently demonstrating its ability to revolutionize the manufacturing industry. It is particularly interesting for industrial applications in terms of reduction of waste materials by starting with fewer feedstocks, reduction of machining time by only have material where it is needed but, above all, it is interesting to extend the life of parts. Indeed, with the DLD, it is possible to repair an item or coat parts via cladding, making it more wear-resistant. It is also possible to give "another life" to broken or waste components, for example, by replacing the damaged area using new material. Moreover, particularly intriguing is the possibility to create hybrid or graded parts by varying material/alloy concentrations. This paper aims to combine the abovementioned advantages to develop tailored structures in order to accomplish complex and functional products. For this purpose, a specific case study was investigated, starting with the study of the appropriate powders to use and ending with the printing process using the DMG Mori Lasertec65. Microstructural and mechanical analyses were carried out to evaluate the products and to validate the process. The final results show the properties and performances of products obtained using this technology. Tue, 30 Mar 2021 17:47:53 +0200 Tue, 30 Mar 2021 17:47:59 +0200 https://popups.uliege.be/esaform21/index.php?id=4124 https://popups.uliege.be/esaform21/index.php?id=3003 PMCs are anisotropic and heterogeneous structures with excellent performances in terms of mechanical strength and stiffness, coupled with reduced weight, widely used in engineering sectors. The use of PMCs can be further extended by improving their surface properties such as electrical conductivity, erosion, radiation and lightning protection. In this context, the surface metallization seems to be best solution. In particular, the cold spray (CS) technique candidates as a potential method for the manufacturing of a metal coating on PMCs’ surface. However, the design and the manufacturing methods of PMCs can play a crucial role for an effective metallization through CS. The additive manufacturing technologies for composite materials can be used to manufacture customized reinforced polymer-based panels, like PMCs; the most common method for printing them is the Fused Filament Fabrication (FFF) technique which relies on the thermal extrusion of a thermoplastic feedstock from a mobile heated nozzle. Therefore, this research activity aims to manufacture customized PMCs panels by using FFF technology for the substrate and the cold spray technique for the metallization in order to study the influence of the substrate manufacturing strategy on CS deposition process. For this purpose, three kind of 3D-printed PMCs were manufactured through the FFF technology by varying the percentage fill of the Onyx polymeric matrix and aluminum powders were sprayed on the substrates with a low-pressure cold spray (LPCS) system; both FFF and CS process parameters were varied to study the process in its wholeness. Microscope analyses were carried out to analyze the influence of the manufacturing strategy on the coating quality. Fri, 26 Mar 2021 15:15:18 +0100 Fri, 02 Apr 2021 17:01:44 +0200 https://popups.uliege.be/esaform21/index.php?id=3003