https://popups.uliege.be/esaform21/index.php?id=3375 Publications of Auteurs Patrizio Lomonaco fr 0 https://popups.uliege.be/esaform21/index.php?id=4017 Polymer-based AM methods are the most mature additive technologies for their versatility and variety of products obtainable. The addition of fibre reinforcement can also confer to the manufactures produced good mechanical properties. Unfortunately, several applications are still precluded because polymers cannot guarantee appropriate electrical conductivity, erosion resistance and operating temperature. Aiming to overcome these issues, the metallization of the surfaces emerges as a possible solution. Unfortunately, thermoplastic polymers exhibit thermosensitive behaviour and run the risk of being damaged when traditional metallization techniques, which require the melting of metal powders which will act as a protective coating. For this reason, studies have focused on Cold Gas Dynamic Spray, an additive manufacturing technology, which exploits kinetic energy to favour the adhesion of metal particles rather than the increase in temperature. In this work, a first attempt is made to verify the feasibility of cold spray coatings on 3D printed composite substrates, produced by means of Fused Filament Fabrication (FFF) technique. FFF technology allows the deposition of two different types of filaments by using a double extruder. These composite fibres within 3D printed parts manage to give the object a resistance comparable to that of a metal part with lower production cost and a high degree of automation. These structures, made of ONYX, a Nylon matrix in which short carbon fibres are dispersed, and reinforced with long carbon fibres, are designed to better fit the CS deposition. Aluminium coatings have been produced and a characterization campaign has been carried on. Tue, 30 Mar 2021 10:01:16 +0200 Tue, 30 Mar 2021 10:26:30 +0200 https://popups.uliege.be/esaform21/index.php?id=4017 https://popups.uliege.be/esaform21/index.php?id=858 Composite materials are widely used as main parts and structural components in different fields, especially for automotive and military applications. Although these materials supply different advantages comparing to the metals, their implementation in engineering applications is limited due to low electrical and thermal properties and low resistance to erosion. To enhance these above-mentioned properties, the metallization of composite materials by creating a thin metal film on their surface can be achieved. Among different coating deposition techniques, Cold Spray appears to be the most suitable one for the metallization of temperature-sensitive materials such as polymers and composites with a thermoplastic matrix. This process relies on kinetic energy for the formation of the coating rather than on thermal energy and consequent erosion and degradation of the polymer-based composite can be avoided. In the last years, a new method to produce composite materials, as known as Fused Filament Fabrication (FFF), has been developed for industrial applications. This technique consists of a 3D printing process that involves the thermal extrusion of thermoplastic polymer and fibers in the form of filaments from a heated mobile nozzle. The implementation of this new technique is leading to the manufacturing of customized composite materials for the cold spray application. In the presented experimental campaign, Onyx material is used as a substrate. This material is made of Nylon, a thermoplastic matrix, and chopped carbon fibers randomly dispersed in it. Aluminum powders were cold sprayed on the Onyx substrate with a low-pressure cold spray (LPCS) system. This study aims to investigate the possibility of the metalizing 3D-printed composite material by cold spray technology. For this purpose, optical and microscopical analyses are carried out. Based on the results, the feasibility of the process and the influence of the morphology of the substrate are discussed, and optimal spraying conditions are proposed. Sun, 21 Mar 2021 22:20:35 +0100 Tue, 30 Mar 2021 11:03:16 +0200 https://popups.uliege.be/esaform21/index.php?id=858