https://popups.uliege.be/esaform21/index.php?id=3401 Publications of Auteurs Luigi Carrino fr 0 https://popups.uliege.be/esaform21/index.php?id=4036 Metal foams have a number of established niche market and potential applications under investigation due to their peculiarities including thermal, acoustic and mechanical properties at low weight. In order to produce structures resistant at high temperature and acting as barrier to the fire, metals with closed cells are often required, and one of the most consolidate manufacturing process for their production is the gas releasing particles decomposition in semisolids, by means of which a foam is created by a foaming agent dispersed into a precursor. In previous researches, the authors have investigated the possibility of foaming the aluminum starting by a precursor, placed between two skins consisting of steel grids, in order to obtain a sandwich structure at the same time of the foaming step. In line to continue on this topic and to improve the compression strength of the aluminum-foamed core, in this work the steel grid was used both as skins and as a corrugated skeleton inside the core. Different types of sandwich structures were manufactured, following some experimental tests executed to determine the optimal value of temperature and time to foam the precursor. Then, compression tests were carried out, in order to investigate the effectiveness of the proposed solution on the improvement of this mechanical behavior. The mechanical tests highlighted the increase of mechanical properties using this type of corrugated core. Tue, 30 Mar 2021 10:35:30 +0200 Tue, 30 Mar 2021 10:43:32 +0200 https://popups.uliege.be/esaform21/index.php?id=4036 https://popups.uliege.be/esaform21/index.php?id=3003 PMCs are anisotropic and heterogeneous structures with excellent performances in terms of mechanical strength and stiffness, coupled with reduced weight, widely used in engineering sectors. The use of PMCs can be further extended by improving their surface properties such as electrical conductivity, erosion, radiation and lightning protection. In this context, the surface metallization seems to be best solution. In particular, the cold spray (CS) technique candidates as a potential method for the manufacturing of a metal coating on PMCs’ surface. However, the design and the manufacturing methods of PMCs can play a crucial role for an effective metallization through CS. The additive manufacturing technologies for composite materials can be used to manufacture customized reinforced polymer-based panels, like PMCs; the most common method for printing them is the Fused Filament Fabrication (FFF) technique which relies on the thermal extrusion of a thermoplastic feedstock from a mobile heated nozzle. Therefore, this research activity aims to manufacture customized PMCs panels by using FFF technology for the substrate and the cold spray technique for the metallization in order to study the influence of the substrate manufacturing strategy on CS deposition process. For this purpose, three kind of 3D-printed PMCs were manufactured through the FFF technology by varying the percentage fill of the Onyx polymeric matrix and aluminum powders were sprayed on the substrates with a low-pressure cold spray (LPCS) system; both FFF and CS process parameters were varied to study the process in its wholeness. Microscope analyses were carried out to analyze the influence of the manufacturing strategy on the coating quality. Fri, 26 Mar 2021 15:15:18 +0100 Fri, 02 Apr 2021 17:01:44 +0200 https://popups.uliege.be/esaform21/index.php?id=3003 https://popups.uliege.be/esaform21/index.php?id=524 In the field of impact response of thermoplastic reinforced composites, several investigations about material behaviour in terms of delamination, indentation and fracture mechanism were conducted. Although a significant influence of the polymer temperature on the overall material impact response is expected, a limited number of studies are available in this regard. Most of the available scientific evidence concerns thermosetting composites and thermoplastic composites response only at room temperature. In particular, the purpose of this contribution is to better understand the dissipation mechanisms involved in thermoplastic reinforced composite under impact conditions for different temperatures. Starting from the few available literature data about the modelling of the problem, the aim of the present work is the development of a numerical approach able to reproduce the experimentally tested conditions. An experimental campaign on hot pressed polyamide 6 /basalt plain fabric laminates impact was selected as the benchmark for the numerical approach. The laminates impact response at increasing values of impact energy between 5J and 30J were simulated under three temperature conditions set around the polymer transition temperature (40°C, 80°C and 100°C). By validating the overall numerical model response on the room temperature experiment, considerations about the magnitude of viscous dissipation and its influence, for the different tested temperatures and in function of the adopted lamination technology, were made. Sat, 20 Mar 2021 00:41:36 +0100 Wed, 14 Apr 2021 13:29:23 +0200 https://popups.uliege.be/esaform21/index.php?id=524