https://popups.uliege.be/esaform21/index.php?id=3402 Publications of Auteurs Dario De Fazio fr 0 https://popups.uliege.be/esaform21/index.php?id=4036 Metal foams have a number of established niche market and potential applications under investigation due to their peculiarities including thermal, acoustic and mechanical properties at low weight. In order to produce structures resistant at high temperature and acting as barrier to the fire, metals with closed cells are often required, and one of the most consolidate manufacturing process for their production is the gas releasing particles decomposition in semisolids, by means of which a foam is created by a foaming agent dispersed into a precursor. In previous researches, the authors have investigated the possibility of foaming the aluminum starting by a precursor, placed between two skins consisting of steel grids, in order to obtain a sandwich structure at the same time of the foaming step. In line to continue on this topic and to improve the compression strength of the aluminum-foamed core, in this work the steel grid was used both as skins and as a corrugated skeleton inside the core. Different types of sandwich structures were manufactured, following some experimental tests executed to determine the optimal value of temperature and time to foam the precursor. Then, compression tests were carried out, in order to investigate the effectiveness of the proposed solution on the improvement of this mechanical behavior. The mechanical tests highlighted the increase of mechanical properties using this type of corrugated core. Tue, 30 Mar 2021 10:35:30 +0200 Tue, 30 Mar 2021 10:43:32 +0200 https://popups.uliege.be/esaform21/index.php?id=4036 https://popups.uliege.be/esaform21/index.php?id=2651 The use of composite hybridization using both synthetic and natural fibers, is one of the most established way to combine the advantages of each material that forms the composite system in order to obtain a composite with good in-plane and out-of-plane properties. For example, as pointed out in authors previous research works, considering carbon/hemp hybrid composites, it is possible to combine the ductile behavior and the capacity to absorb energy of hemp fibers with the higher strength and stiffness of carbon allowing the development of a hybrid system with enhanced energy absorption capability, reduced production cost and lower environmental impact respect to traditional carbon fibers composites. The aim of this work is to investigate both experimentally and numerically the mechanical behavior at impact of pure carbon, pure hemp and carbon/hemp hybrid composite laminate. Low velocity impact tests at 10 J and 20 J were carried and non-destructive analyses were performed for each impact energy to evaluate the internal damage extent. The same tests were numerically simulated with LS-DYNA software using shell elements and different material cards (i.e. MAT 54/55, MAT 24 depending on typology of fibers) and contact conditions in order to find the best configuration that matches the experimental results. Wed, 24 Mar 2021 18:37:18 +0100 Fri, 09 Apr 2021 10:38:58 +0200 https://popups.uliege.be/esaform21/index.php?id=2651