https://popups.uliege.be/esaform21/index.php?id=383 Publications of Auteurs Dominik Dörr fr 0 https://popups.uliege.be/esaform21/index.php?id=883 Finite element (FE) forming simulation offers the possibility of a detailed analysis of the deformation behaviour of engineering textiles during forming processes, to predict possible manufacturing effects such as wrinkling or local changes in fibre volume content. The majority of macroscopic simulations are based on conventional two-dimensional shell elements with large aspect ratios to model the membrane and bending behaviour of thin fabrics efficiently. However, a three-dimensional element approach is necessary to account for stresses and strains in thickness direction accurately, which is required for processes with a significant influence of the fabric’s compaction behaviour, e.g. wet compression moulding. Conventional linear 3D-solid elements that would be commercially available for this purpose are rarely suitable for high aspect ratio forming simulations. They are often subjected to several locking phenomena under bending deformation, which leads to a strong dependence of the element formulation on the forming behaviour [1]. Therefore, in the present work a 3D hexahedral solid-shell element, based on the initial work of Schwarze and Reese [2,3], which has shown promising results for the forming of thin isotropic materials [1], is extended for highly anisotropic materials. The advantages of a locking-free element formulation are shown through a comparison to commercially available solid and shell elements in forming simulations of a generic geometry. Additionally, first ideas for an approach of a membrane-bending-decoupling based on a Taylor approximation of the strain are discussed, which is necessary for an accurate description of the deformation behaviour of thin fabrics. Mon, 22 Mar 2021 09:49:49 +0100 Tue, 30 Mar 2021 09:49:12 +0200 https://popups.uliege.be/esaform21/index.php?id=883 https://popups.uliege.be/esaform21/index.php?id=376 In this study, a sequential thermoforming and squeeze flow simulation approach for Glass Mat Thermoplastic (GMT) material is proposed and applied to a hat section geometry using input properties based upon Tepex flowcore, a long glass fiber reinforced polyamide (PA/GF) mat manufactured by Lanxess. First, a fully-coupled thermomechanical simulation is conducted based on a purely Lagrangian description, to efficiently capture thermoforming. Subsequently, relevant state variables are mapped and initialized for a Coupled-Eulerian-Lagrangian (CEL) approach. The CEL approach is adopted to accurately capture squeeze flow, which is not possible by a purely Lagrangian description. While numerical techniques differ, both approaches use the same three-dimensional and thermomechanical constitutive equations including an equation of state, a nonlinear viscosity model, and crystallization kinetics, implemented through a material user-subroutine (VUMAT) for the commercially available simulation software package ABAQUS/Explicit. Fri, 19 Mar 2021 17:35:11 +0100 Tue, 30 Mar 2021 09:42:01 +0200 https://popups.uliege.be/esaform21/index.php?id=376