https://popups.uliege.be/esaform21/index.php?id=4279 Index terms fr 0 https://popups.uliege.be/esaform21/index.php?id=4277 Driven by the CO2-emission law by the European government and the increasing costs for raw materials as well as energy, the automotive industry is increasingly using multi-material constructions. This leads to a continuous increase in the use of mechanical joining techniques and especially the self-piercing riveting is of particular importance. The reason for this is the wide range of joining possibilities as well as the high load-bearing capacities of the joints. To be able to react to changing boundary conditions, like material thickness or strength variation of the sheets, research work is crucial with regard to the increase of versatility. In this paper, a numerical study of the influences on the selfpiercing riveting process is presented. For this purpose, the influence of different process parameters such as rivet length and die depth on various quality-relevant characteristics were investigated. With the help of the design of experiment, significant influences were determined and interactions between the individual parameters are shown. Thu, 01 Apr 2021 17:46:14 +0200 Mon, 12 Apr 2021 11:37:54 +0200 https://popups.uliege.be/esaform21/index.php?id=4277 https://popups.uliege.be/esaform21/index.php?id=1911 The use of high-strength steel and aluminium is rising due to the intensified efforts being made in lightweight design, and self-piercing riveting is becoming increasingly important. Conventional rivets for self-piercing riveting differ in their geometry, the material used, the condition of the material and the coating. To shorten the manufacturing process, the use of stainless steel with high strain hardening as the rivet material represents a promising approach. This allows the coating of the rivets to be omitted due to the corrosion resistance of the material and, since the strength of the stainless steel is achieved by cold forming, heat treatment is no longer required. In addition, it is possible to adjust the local strength within the rivet. Because of that, the authors have elaborated a concept for using high nitrogen steel 1.3815 as the rivet material. The present investigation focusses on the joint strength in order to evaluate the capability of rivets in high nitrogen steel by comparison to conventional rivets made of treatable steel. Due to certain challenges in the forming process of the high nitrogen steel rivets, deviations result from the targeted rivet geometry. Mainly these deviations cause a lower joint strength with these rivets, which is, however, adequate. All in all, the capability of the new rivet is proven by the results of this investigation. Tue, 23 Mar 2021 10:35:05 +0100 Mon, 12 Apr 2021 10:05:15 +0200 https://popups.uliege.be/esaform21/index.php?id=1911 https://popups.uliege.be/esaform21/index.php?id=398 The growing demands of resource-saving processes and products are leading to increasing importance of lightweight construction for the automotive industry. One approach is multi-material design, which uses high-strength steels and aluminium alloys in the production of vehicle bodies. Therefore, reliable processes for joining components with different mechanical properties and geometries are necessary. As conventional joining processes reach their limits, new versatile processes and methods are required which can adapt to different process conditions and disturbance variables. A widely used joining process to join different materials is self-piercing riveting as a joining by forming method, however it is characterised as inflexible to changing process conditions due to a linear process kinematic and rigid dies. An approach to extend the process limits is the application of a tumbling kinematic for the punch. Thus, an adapted tumbling strategy can be used to influence the joining process and to achieve a controlled material flow in order to manufacture tailored joints. For the fundamental investigation of the process, numerical investigations are necessary. In order to achieve high model quality a precise material modelling is crucial. Therefore, a characterisation of the materials HCT590X+Z and EN AW-6014 as typical materials of multi-material mixes and the rivet material 38B2 is performed. Due to the different stress conditions during tumbling self-piercing riveting suitable characterisation methods are selected and carried out. Fri, 19 Mar 2021 18:17:54 +0100 Mon, 12 Apr 2021 09:15:37 +0200 https://popups.uliege.be/esaform21/index.php?id=398