Acta Stereologica

0351-580X

 

depuis le 05 décembre 2013 :
Visualisation(s): 1072 (2 ULiège)
Téléchargement(s): 114 (1 ULiège)
print        
Branka Jordovic, Vojislav Mitic & Zoran S. Nikolic

Effects of sintering time and temperature on BaTiO3 – Ceramic microstructural characteristics

(Volume 13 (1994) — Number 2 - Proceedings of the sixth European congress for stereology - Part three - June 1994)
Article
Open Access

Document(s) associé(s)

Version PDF originale

Annexes

Abstract

The effects of time and temperature of sintering on microstructural characteristics of barium—titanate were investigated in this paper. Microstructural investigation have been done by optical microscopy using quantitative analysis methods and SEM microscopy. The specimens were prepared from high purity BaTiO3 powders with 0.10% CeO2 and 0.14% MnCO3 and sintered at various temperatures ranged from 1190 °C to 1370 °C, for different times. All the samples were examined by quantitative microstructural analysis and parameters related to the grain size and porosity have been determined such as: section area (A), perimeter (Lp), form factor (f), numerical density (NA) and volume fraction (Vv) of pores.

The results have shown that the grain sizes increase with the increase of sintering temperature, but with different intensity depending on time of sintering. For two different times of sintering, the critical sintering temperature has been determined.

During the process of sintering although the pore sizes increase, the reduction on Na and Vv occurred. The reduction of Lp parameter value and the growth of f parameter pointed out the agglomeration of pores as the sintering temperatures are raised.

The mathematical modelling method has been used to, discuss the experimental results. A cumulative density function is proposed for interpretation of the results obtained in this study. A great extent of agreement between theoretical and experimental results pointed out the beneficial use of this method in microstructural investigation of ceramic materials.

Keywords : ceramics, grain size distribution, microstructure, sintering process

Pour citer cet article

Branka Jordovic, Vojislav Mitic & Zoran S. Nikolic, «Effects of sintering time and temperature on BaTiO3 – Ceramic microstructural characteristics», Acta Stereologica [En ligne], Volume 13 (1994), Number 2 - Proceedings of the sixth European congress for stereology - Part three - June 1994, 381-388 URL : https://popups.uliege.be/0351-580x/index.php?id=1274.

A propos de : Branka Jordovic

Technical Faculty — 32000 Cacak, Yugoslavia

A propos de : Vojislav Mitic

Faculty of Electronic Engineering, University of Nish, 18000 Nis, Yugoslavia

A propos de : Zoran S. Nikolic

Faculty of Electronic Engineering, University of Nish, 18000 Nis, Yugoslavia