Acta Stereologica

0351-580X

 

ya que 05 diciembre 2013 :
Vista(s): 260 (3 ULiège)
Descargar(s): 137 (3 ULiège)
print        
Janez Grum & Aleksander Oblak

Use of linear discriminating function for the description of the effects of microstructure on surface roughness after fine-turning

(Volume 18 (1999) — Number 3 - Nov. 1999)
Article
Open Access

Documento adjunto(s)

Anexidades

Abstract

It has been proven that successful cutting of metal materials depends on the morphology, and the size and distribution of intermetallic phases in the basic microstructure. An analysis of the microstructure of some aluminium alloys was carried out on an automatic system for image acquisition and processing. For the analysis intercept linear and area measurement methods were used. The present report describes the plastomechanical mechanism of surface generation in machining various aluminium alloys with silicon and its influence on the workpiece surface. By relating the data on the mean arithmetic roughness and the corresponding intercept length of the solid solution crystals it is possible to get, with the aid of the linear discriminante function, the particular areas which define the classes of expected roughness with respect to the microstructural effects in the same fine turning conditions.

Keywords : aluminium alloys, fine turning, linear discriminante function, microstructure, roughness, size distribution, structure parameters

Para citar este artículo

Janez Grum & Aleksander Oblak, «Use of linear discriminating function for the description of the effects of microstructure on surface roughness after fine-turning», Acta Stereologica [En ligne], Volume 18 (1999), Number 3 - Nov. 1999, 313-318 URL : https://popups.uliege.be/0351-580x/index.php?id=2328.

Acerca de: Janez Grum

Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia

Acerca de: Aleksander Oblak

Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia