Acta Stereologica

0351-580X

 

depuis le 05 décembre 2013 :
Visualisation(s): 170 (1 ULiège)
Téléchargement(s): 34 (1 ULiège)
print        
Michal Mutl, Roman Sedlák, Eliška Keilová, Jan Kočik & Viktor Beneš

Quantitative analysis of dislocation substructures

(Volume 13 (1994) — Number 2 - Proceedings of the sixth European congress for stereology - Part three - June 1994)
Article
Open Access

Document(s) associé(s)

Annexes

Abstract

Microstructural defects in materials are usually modelled in terms of point, fibre or surface processes in stochastic geometry. Dislocations are a typical example of fibre structure in metals. In addition to the dislocation density the arrangement of dislocations, described by the pair correlation function, is an important characteristic of the dislocation substructure which reflects a prior treatment of the material.

For an isotropic structure, the function can be approximated by the planar pair correlation function, obtained from TEM micrographs, i.e. from projections of thin foils of thickness t.

The computer program for PC AT was prepared using a graphic card for the estimation procedure. The circular probes with increasing radius were used to evaluate the pair correlation function. The method was used to investigate the dislocation substructure in Cr-Mo-V ferritic steel before and after irradiating.

In addition to that, the relation of a dislocation substructure to both homogeneously distributed precipitate particles and heterogeneously formed radiation-induced defects in ferritic reactor pressure steels was studied by means of the cross-correlation function. Applying this function to a couple of random fibre process X and a random point process Y of particles and defects, respectively, centroids, provides information on the relation between these processes.

Keywords : cross-correlation function, dislocation substructure, evaluating software, fibre process

Pour citer cet article

Michal Mutl, Roman Sedlák, Eliška Keilová, Jan Kočik & Viktor Beneš, «Quantitative analysis of dislocation substructures», Acta Stereologica [En ligne], Volume 13 (1994), Number 2 - Proceedings of the sixth European congress for stereology - Part three - June 1994, 479-484 URL : https://popups.uliege.be/0351-580x/index.php?id=4364.

A propos de : Michal Mutl

Czech Technical University, Faculty of Mechanical Engineering, Department of Mathematics, Karlovo nám. 13, 121 35 Prague 2, Czech Republic

A propos de : Roman Sedlák

Laboratory Imaging s. r. o., Přetlucká 41, 100 00 Prague 10, Czech Republic

A propos de : Eliška Keilová

Nuclear Research Institute Řež plc, 250 68 Řež, near Prague, Czech Republic

A propos de : Jan Kočik

Nuclear Research Institute Řež plc, 250 68 Řež, near Prague, Czech Republic

A propos de : Viktor Beneš

Czech Technical University, Faculty of Mechanical Engineering, Department of Mathematics, Karlovo nám. 13, 121 35 Prague 2, Czech Republic