Acta Stereologica

0351-580X

 

since 05 December 2013 :
View(s): 356 (1 ULiège)
Download(s): 47 (0 ULiège)
print        
Viktor Beneš, Zdenek Kořínek & Marek Postler

An enhanced model for the fibre pull-out and failure in thermoplastic composites

(Volume 14 (1995) — Number 1 - Stermat '94 - Sep. 1995)
Article
Open Access

Attached document(s)

Annexes

Abstract

An enhanced method of evaluation of fibre-matrix adhesion in short fibre composites is developed. A parametric model of the fibre pull-out and failure is proposed. The parameters are estimated by means of the degree-of-fit criterion of the empirical and theoretical probability distribution function of fibre pull-out length. This length is experimentally measured on the fracture surface, while the theoretical probabilities are obtained by means of simulations. The practical results obtained are based on the known fibre length distribution in injection-moulded composites made from polymers and glass fibres.

Keywords : composite material, fibre pull-out and failure, length distribution

To cite this article

Viktor Beneš, Zdenek Kořínek & Marek Postler, «An enhanced model for the fibre pull-out and failure in thermoplastic composites», Acta Stereologica [En ligne], Number 1 - Stermat '94 - Sep. 1995, Volume 14 (1995), 17-22 URL : https://popups.uliege.be/0351-580x/index.php?id=637.

About: Viktor Beneš

Dept. of Mathematics, FSI, Czech Technical University, Karlovo Nám. 13, 12135 Prague 2, Czech Republic

About: Zdenek Kořínek

Dept. of Material Sciences, FSI, Czech Technical University, Karlovo Nám. 13, 12135 Prague 2, Czech Republic

About: Marek Postler

Dept. of Material Sciences, FSI, Czech Technical University, Karlovo Nám. 13, 12135 Prague 2, Czech Republic