MS10 (Non Conventional Proc.) | 2021

Non-Conventional Processes

Coordinator: Dr. Margareta Coteata

Co-organisers: Dr. Hans-Peter Schulze(tbc), Prof. Massimo Durante, Prof. Loredana Santo, Prof. Laurentiu Slatineau.

Description: The main topics of MS are: EDM, ECM, EME, EHE, cold spray, Friction Stir Welding and Single Point Forming for polymers, creep age forming. Historically starting from some innovative processes initially included in this MS, new symposia were created. Therefore, in order to maintain this characteristic of individuating new processes of scientific interest, the papers regarding innovative processes or forming processes of non-conventional materials (innovative materials or hybrid structures) will be considered in this MS.

Robot-assisted surface treatment strategies of AA6014 sheet metal for accumulative roll bonding

Bastian Zettl and Marion Merklein
Analysis of the extreme temperature's effect on the low-velocity impact behaviour and damage evolution in sandwich components

Ilaria Papa, Luca Boccarusso, Davide Mocerino and Antonio Langella
Considerations on the Influence of the Tool/Sheet Contact Conditions for Incremental Forming of Niobium Sheets

Antonio Formisano, Antonello Astarita, Luca Boccarusso, Massimo Durante, Marco Garlasché and Antonio Langella
A computer vision-based, in-situ springback monitoring technique for bending of large profiles

Taekwang Ha, Jun Ma, Jørgen Blindheim, Torgeir Welo, Geir Ringen and Jyhwen Wang
Wire electrical discharge machinability and load-bearing capacity of ATZ-WC composite ceramics

Marcel Olivier, Raphael Heß, Andrea Gommeringer, Frank Kern, Tim Herrig and Thomas Bergs
Directing the Material Flow and Form Filling through a Multi-axis Forming Process

Birk Wonnenberg, Felix Gabriel and Klaus Dröder
Corrugated Structure Reinforcing Aluminum Foam

Massimo Durante, Luca Boccarusso, Antonio Formisano, Dario De Fazio, Antonio Viscusi and Luigi Carrino
Efficient Prediction of Real-Time Forming Forces in Flexible Stretch Bending

Jun Ma, Torgeir Welo and Geir Ringen
Recyclability Process of Gypsum Reinforced with Hemp Fabrics: Impact and Flexural Behaviour

Luca Boccarusso, Davide Mocerino, Massimo Durante, Fabio Iucolano, Fabrizio Memola Capece Minutolo and Antonio Langella
Analysis of laser cut slots on different thickness steel plates

Sergiu Constantin Olaru, Margareta Coteaţă, Gheorghe Nagîţ, Adelina Hriţuc, Oana Dodun and Laurenţiu Slătineanu
Analysis of Sub-processes Specific to Hybrid Non-conventional Machining Methods

Hans-Peter Schulze and Oliver Kröning
Electromagnetic Embossing of Optical Microstructures with High Aspect Ratios in Thin Aluminum Sheets

Julian Heidhoff, Björn Beckschwarte, Oltmann Riemer, Lars Schönemann, Marius Herrmann, Christian Schenck and Bernd Kuhfuss
Fracture Toughness and Tribological Properties of Cemented Carbides Machined by Sinking Electrical Discharge Machining

Timm Petersen, Ugur Küpper, Tim Herrig, Andreas Klink and Thomas Bergs
Anisogrid lattice cylinders made of thermoplastic composite under buckling loading

Leandro Iorio, Denise Bellisario, Nicola Gallo, Claudia Papa, Marco Regi, Daniele Santoro, Fabrizio Quadrini and Loredana Santo